Juniper JN0-532 training and testing

Juniper certification JN0-532 exam is a rare examination opportunity to improve yourself and it is very valuable in the IT field. There are many IT professionals to participate in this exam. Passing Juniper certification JN0-532 exam can improve your IT skills. Our ITCertKing provide you practice questions about Juniper certification JN0-532 exam. ITCertKing's professional IT team will provide you with the latest training tools to help you realize their dreams earlier. ITCertKing have the best quality and the latest Juniper certification JN0-532 exam training materials and they can help you pass the Juniper certification JN0-532 exam successfully.

When we started offering Juniper JN0-532 exam questions and answers and exam simulator, we did not think that we will get such a big reputation. What we are doing now is incredible form of a guarantee. ITCertKing guarantee passing rate of 100%, you use your Juniper JN0-532 exam to try our Juniper JN0-532 training products, this is correct, we can guarantee your success.

ITCertKing's Juniper JN0-532 exam training materials' simulation is particularly high. You can encounter the same questions in the real real exam. This only shows that the ability of our IT elite team is really high. Now many ambitious IT staff to make their own configuration files compatible with the market demand, to realize their ideals through these hot IT exam certification. Achieved excellent results in the Juniper JN0-532 exam. With the Juniper JN0-532 exam training of ITCertKing, the door of the dream will open for you.

ITCertKing is a convenient website to provide service for many of the candidates participating in the IT certification exams. A lot of candidates who choose to use the ITCertKing's product have passed IT certification exams for only one time. And from the feedback of them, helps from ITCertKing are proved to be effective. ITCertKing's expert team is a large team composed of senior IT professionals. And they take advantage of their expertise and abundant experience to come up with the useful training materials about JN0-532 certification exam. ITCertKing's simulation test software and related questions of JN0-532 certification exam are produced by the analysis of JN0-532 exam outline, and they can definitely help you pass your first time to participate in JN0-532 certification exam.

We are all ordinary human beings. Something what have learned not completely absorbed, so that wo often forget. When we need to use the knowledge we must learn again. When you see ITCertKing's Juniper JN0-532 exam training materials, you understand that this is you have to be purchased. It allows you to pass the exam effortlessly. You should believe ITCertKing will let you see your better future. Bright hard the hard as long as ITCertKing still, always find hope. No matter how bitter and more difficult, with ITCertKing you will still find the hope of light.

Exam Code: JN0-532
Exam Name: Juniper (FWV,Specialist (JNCIS -FWV))
One year free update, No help, Full refund!
Total Q&A: 146 Questions and Answers
Last Update: 2013-10-09

Through the feedback of many examinees who have used ITCertKing's training program to pass some IT certification exams, it proves that using ITCertKing's products to pass IT certification exams is very easy. Recently, ITCertKing has developed the newest training solutions about the popular Juniper certification JN0-532 exam, including some pertinent simulation tests that will help you consolidate related knowledge and let you be well ready for Juniper certification JN0-532 exam.

JN0-532 Free Demo Download: http://www.itcertking.com/JN0-532_exam.html

NO.1 Click the Exhibit button.
In the exhibit, which two can be determined about the VPN? (Choose two.)
A.NAT-traversal is enabled.
B.The rekey interval is 8 hours.
C.This device initiated the Phase 1 negotiations.
D.The certificate used in this exchange is set to never expire.
Answer: BC

Juniper study guide   JN0-532 exam prep   JN0-532   JN0-532

NO.2 You have created a virtual router called VSYSA-vr and made it shareable. You then create the VSYS
using the WebUI, telling it to use an existing VR and selecting the VR called VSYSA-vr.
What is the status of the virtual router after you create the VSYS?
A.The router will be the default router but will no longer be shared.
B.The router will be the default router and will still have a shareable status.
C.The system will not let you use a shared virtual router when you create a new VSYS. The initial virtual
router must be private.
D.The system will not create a private vr for the VSYS but will assign the untrust-vr as the default router.
The shared Virtual router will not be the default router.
Answer: B

Juniper   JN0-532   JN0-532 pdf   JN0-532   JN0-532 test questions

NO.3 You have entered the command set ffilter src-ip 1.1.7.250 dst-ip 10.1.10.5 ip-prot 6
What will be the resulting output in the debug for which this was created?
A.If the packet has a src-ip of 1.1.7.250 or a dst-ip of 10.1.10.5 or has TCP as its protocol then it will be
captured
B.If the packet has a src-ip of 1.1.7.250 or a dst-ip of 10.1.10.5 or has UDP as its protocol then it will be
captured
C.If the packet has a src-ip of 1.1.7.250 and a dst-ip of 10.1.10.5 and has TCP as its protocol then it will
be captured
D.If the packet has a src-ip of 1.1.7.250 and a dst-ip of 10.1.10.5 and has UDP as its protocol then it will
be captured
Answer: C

Juniper   JN0-532 pdf   JN0-532 braindump   JN0-532 study guide   JN0-532 exam prep

NO.4 Which two item pairs are exchanged during Phase 2 negotiations? (Choose two.)
A.proxy-id, SA proposal list
B.IKE cookie, SA proposal list
C.hash [ID + Key], DH key exchange
D.SA proposal list, optional DH key exchange
Answer: AD

Juniper   JN0-532   JN0-532   JN0-532

NO.5 Click the Exhibit button.
In the exhibit, the firewall administrator at the Storefront is complaining that when the communication to
the DataCenter1 fails, the preexisting transfers and applications are dropped when the traffic is switched
to DataCenter2.
Which statement explains this behavior?
A.SYN checking is enabled in the tunnel.
B.The weight value for the DataCenter2 is too high.
C.VPN monitor is misconfigured in the DataCenter2.
D.Phase 1 and Phase 2 negotiations to DataCenter2 did not occur on time.
Answer: A

Juniper   JN0-532   JN0-532

NO.6 Which ScreenOS CLI command is necessary for configuring IGMP on interface ethernet0/1?
A.set igmp interface ethernet0/1
B.set multicast interface ethernet0/1
C.set interface ethernet0/1 igmp router
D.set igmp interface ethernet0/1 enable
Answer: C

Juniper   JN0-532 original questions   JN0-532 test answers   JN0-532   JN0-532

NO.7 Which three statements are true regarding IKE Phase 1? (Choose three.)
A.Placing the SA proposal list in message 1 is an option.
B.The digital certificate is used to decrypt the session key.
C.The DH key exchange is used to validate the session key.
D.The DH key exchange and digital certificates are both optional.
E.The proxy-id is used to determine which SA is referenced for the VPN.
Answer: ABC

Juniper   JN0-532   JN0-532 exam prep   JN0-532

NO.8 Click the Exhibit button.
Review the exhibit. Track-ip has failed on the device, but the device did not fail over to the second unit in
the cluster:
Why has failover not occurred?
A.The physical interfaces have not failed.
B.The track-ip interval is not sufficient to cause failover.
C.The track-ip address weight is not sufficient to cause failover.
D.The track-ip address threshold is not sufficient to cause failover.
Answer: C

Juniper   JN0-532   JN0-532   JN0-532   JN0-532 test answers

NO.9 Which CLI command identifies the multicast sources visible to your ScreenOS device?
A.get route pim
B.get igmp source all
C.exec pim interface all query
D.get vrouter trust-vr protocol pim
Answer: D

Juniper   JN0-532 answers real questions   JN0-532   JN0-532 pdf

NO.10 Click the Exhibit button.
In the exhibit, what is the source IP address of the multicast traffic?
A.236.1.1.1
B.10.10.10.1
C.20.20.20.10
D.20.20.20.200
Answer: B

Juniper   JN0-532   JN0-532

NO.11 What must be enabled to protect Phase 2 key exchanges?
A.Phase 1 PFS
B.Phase 2 SHA
C.Phase 2 3-DES
D.Phase 2 DH key exchange tiations? (Choose two.)
A.proxy-id, SA proposal list
B.IKE cookie, SA proposal list
C.hash [ID + Key], DH key exchange
D.SA proposal list, optional DH key exchange
Answer: D

Juniper questions   JN0-532 test questions   JN0-532   JN0-532   JN0-532

NO.12 Click the Exhibit button.
In the exhibit, what is the address of the multicast receiver?
A.234.9.8.42
B.192.168.10.2
C.192.168.20.10
D.192.168.20.200
Answer: D

Juniper pdf   JN0-532   JN0-532 practice test

NO.13 Review the exhibit.
You've been asked to build a route-based hub and spoke network, with policy control for traffic travelling
from spoke to spoke. Which two of the following configuration options will meet this requirement?
(Choose two.)
A.Place the spoke tunnel interfaces in the trust zone and create policies on the spokes.
B.Place the spoke tunnel interfaces in the untrust zone and create policies on the spokes.
C.Create a single tunnel interface in the trust zone at the hub and enable intra-zone blocking.
D.Create separate tunnel interfaces at the hub and place them in different zones, then create policies at
the hub.
Answer: BD

Juniper   JN0-532   JN0-532   JN0-532

NO.14 Which three OSPF parameters are interface parameters? (Choose three.)
A.cost
B.priority
C.neighbor list
D.summarization
E.advertise default route
Answer: ABC

Juniper original questions   JN0-532   JN0-532   JN0-532

NO.15 You have configured the following on your device.
set address trust MyPC 10.1.1.5/32
set address untrust CorpNet 10.10.0.0/16
set policy from trust to untrust MyPC CorpNet any permit
set int tunnel.1 zone untrust
set int tunnel.1 ip unnumbered int bgroup1
set ike gateway GW address 1.1.1.1 outgoing-interface e0/1 preshare Secret sec-level standard
set vpn VPN gateway GW sec-level standard
The tunnel interface is down, so the VPN cannot function properly. What is the problem?
A.The policy needs to have the action tunnel.
B.The VPN needs to be bound to the tunnel interface.
C.The tunnel interface needs to be placed in the trust zone.
D.The tunnel interface needs to be associated with the interface in the untrust zone.
Answer: B

Juniper   JN0-532 exam prep   JN0-532 exam simulations   JN0-532   JN0-532

NO.16 Review the exhibit.
Which two of the following elements must be configured on the ScreenOS device in order to support
PIM-SM? (Choose two)
A.A multicast control policy
B.A bootstrap router process
C.A unicast routing protocol
D.A static RP
Answer: AC

Juniper   JN0-532   JN0-532   JN0-532 pdf

NO.17 During main mode negations a failure has occurred while using IKE certificates.
Which message pair would you review to troubleshoot this failure?
A.messages 1 & 2
B.messages 2 & 3
C.messages 3 & 4
D.messages 5 & 6
Answer: D

Juniper   JN0-532   JN0-532 exam simulations   JN0-532   JN0-532 exam dumps

NO.18 To which three ScreenOS components can a policy-based routing policy be bound? (Choose three.)
A.zone
B.policy
C.interface
D.virtual router
E.virtual system
Answer: ACD

Juniper   JN0-532 questions   JN0-532

NO.19 What must be configured differently for a route-based VPN and a policy-based VPN?
A.proxy-id
B.proposals
C.remote gateway type
D.binding the tunnel interface
Answer: D

Juniper pdf   JN0-532 braindump   JN0-532

NO.20 Which command is used to verify that IGMP is running correctly?
A.get route igmp
B.get igmp query
C.set igmp query interface e0/1
D.exec igmp interface e0/1 query
Answer: D

Juniper   JN0-532   JN0-532   JN0-532

ITCertKing offer the latest 000-124 exam material and high-quality 200-120 pdf questions & answers. Our BAS-013 VCE testing engine and 70-341 study guide can help you pass the real exam. High-quality 1Z0-511 dumps training materials can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.

Article Link: http://www.itcertking.com/JN0-532_exam.html